Meshing time reduction with Autogrid5™
As a key player in the aerospace market, at GKN Aerospace we need to be very demanding regarding the capabilities of the tools we use. In the fast-paced environment that is the CFD world, our engineers need a robust and quick mesh generator, providing an accurate capturing of our complex turbomachinery geometries.
Martin Olausson, GKN Aerospace Engine Systems in Sweden.
"Since we acquired AutoGrid5™, we divided our meshing time by 5, allowing us to spend more time on the post-processing and the solving of our real challenges."
"My colleagues using NUMECA direct competitor's meshing tool, can't keep the pace with us! In fact, they are getting more and more interested by NUMECA's tools, so we’ve organized an internal AutoGrid5™ training for them, so we can take advantage of Autogrid5™’s advantages for an even larger set of our applications."
Typical turbomachinery geometry meshed by GKN Aerospace. In yellow the passages that are really meshed. Below the quality and the mesh generation time for each part.
"With AutoGrid5™, it is only a matter of a few hours to come up with a high quality periodic matching mesh around multiple blade rows, starting from scratch. The row-wizard setting up automatically a different topology for each type of machine configuration (axial compressor, axial turbine, centrifugal impeller, etc.) provides us a huge gain of time."
"We are investigating a lot of advanced features, such as cavities using the ZR effects, fillets on the hub, snubber with fillets, partial tip gaps, etc., so the possibility to include them automatically and easily in the final mesh allows us to capture more accurately the topology of the flow. Globally speaking, this tool saves us time and increases the accuracy of our CFD simulations."
Fillets can be imported from a CAD model, or directly created within the interface of AutoGrid5. In GKN’s case, they are created within AG5.
Non-axisymmetric and partial tip gaps (in black) can be created on the hub and on the shroud of a blade.