The newest version of the Omnis™ simulation environment brings a new discrete particle solver, a surface-to-volume mesh module and more than 100 other new features that will simplify your workflows, boost your productivity and extend the scope of your simulations.

Omnis™/Hexpress – Surface to volume meshing approach

Omnis™/Hexpress extends its unstructured mesh generation tool set with the surface-to-volume module.
The surface-to-volume module allows generating 3D grids with high-quality surface meshes, aligned with the geometry and with smooth and thickness-controlled viscous layers when the geometry is clean and conformal.

Omnis™/Autogrid - Meridional effects with autoblocking (beta)

Omnis™/AutoGrid can now generate multi-block structured meshes of axisymmetric meridional effects (e.g. seal leakage, bleed or cavities) connected to the channel of the turbomachinery configuration.

Omnis™/Turbo – Coarse grid simulation

The Omnis™/Turbo simulation can run on a coarser grid level with the same mesh and simulation setup. This feature allows to quickly assess the correct setup of the simulation and preview its results before a final accurate run on the finest grid level.

Omnis™/Open (DBS and PBS) – Surface-to-surface radiation

The surface-to-surface (S2S) radiation model has been introduced in the Omnis™/Open density-based and coupled pressure-based solvers to account for the radiation exchange in an enclosure of grey-diffuse surfaces.

Omnis™/Oofelie – Advanced thermomechanical analysis for turbomachinery

Our commitment to providing more advanced solutions for turbomachinery designers continues with Omnis™/Oofelie. The results of static runs can be used for calculating natural frequencies and mode shapes of mechanical parts. Other important new features include also the computation of complex mode shapes due to the presence of Coriolis effects and wet mode shapes, for machines with a high-density operating fluid.

Omnis™/Mpacts – Particles motion and interaction (beta)

The new Omnis™/Mpacts solver allows the simulation of particle collisions for a variety of industrial applications such as conveyor belts, hoppers and mixers.
Omnis™/Mpacts combines the power of the advanced Discrete Element Method (DEM) solver Mpacts with the user-friendly Omnis™ interface and all its capabilities from the pre-processing to co/post-processing in one workflow.

Omnis™/Post – Display streamlines

Users can now display streamlines to trace the flow velocity, from a point, line, plane, or sphere with interactive controls in Omnis™/Post.

And plenty of other improvements have been made, details are available on our customer area.

We hope you enjoy this new version!